[Milsurplus] Receiver wanted (for GO-9)

[COURYHOUSE at aol.com]

ok  what  part controls the  filament  voltage  then?
 
 
In a message dated 7/17/2017 1:16:40 P.M. US Mountain Standard Time,  
milsurplus at mailman.qth.net writes:

Yes.  But they both use the same receiver  (CW-46048D).  The only 
difference between a receiver marked for RU-18 and  one marked for RU-19 is the 
nameplate.  The electrical differences are  the dynamotor and the junction box.  

In a message dated  07/17/2017 14:48:07 PM Central Daylight Time, 
milsurplus at mailman.qth.net  writes: 

Is the RU 18 the same as the RU-19 except   18  is  12-14 volts   and the 
19 is  24v.....  

Ed@   _www.smecc.org_ (http://www.smecc.org/)   




Robert & Susan Downs - Houston
wa5cab  dot com (Web Store)
MVPA  9480

______________________________________________________________
Milsurplus  mailing list
Home:  http://mailman.qth.net/mailman/listinfo/milsurplus
Help:  http://mailman.qth.net/mmfaq.htm
Post:  mailto:Milsurplus at mailman.qth.net

This list hosted by:  http://www.qsl.net
Please help support this email list:  http://www.qsl.net/donate.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/milsurplus/attachments/20170717/5e76c9c3/attachment.html>