[Milsurplus] ATR-11 circuit

[MICHAEL ST ANGELO]

Maybe they had spares in mind using he same tube.


Mike N2MS

 

> On January 12, 2017 at 11:03 PM Hubert Miller <Kargo_cult at msn.com> wrote:
> 
> 
>     Was looking at my one poor lonely RCAF ATR-11 schematic, from ETCO back in the day, and i seem to see that the VFO
> 
>     tube is a 1625. Isn’t this a rather large tube to use as a VFO to drive single 1625 PA ?
> 
>      
> 
>     This radio “i think” was built by RCA Canada. Somewhat interestingly, it has the same freq range, or very similar, to the
> 
>     BC-474 :  2.3 – 6.5 MHz. Also similarly, pretty poor tuning dial resolution. But of course, it wasn’t intended for tuning
> 
>     around the ham bands.
> 
>     -Hue
> 


 

> ______________________________________________________________
>     Milsurplus mailing list
>     Home: http://mailman.qth.net/mailman/listinfo/milsurplus
>     Help: http://mailman.qth.net/mmfaq.htm
>     Post: mailto:Milsurplus at mailman.qth.net
> 
>     This list hosted by: http://www.qsl.net
>     Please help support this email list: http://www.qsl.net/donate.html
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/milsurplus/attachments/20170113/ef7928c0/attachment.html>