[Milsurplus] TA-12 XMTR in Pairs?

[George Babits]

It's a 3616B

----- Original Message ----- 
From: "Michael Hanz" <aaf-radio-1 at aafradio.org>
To: "George Babits" <gbabits at custertel.net>; "milsurplus" 
<milsurplus at mailman.qth.net>
Sent: Friday, May 13, 2016 8:15 PM
Subject: Re: [Milsurplus] TA-12 XMTR in Pairs?


> What's the Bendix number on the control box, George?  The MT-34/TA-2 also 
> had 8 channels.
>
> 73,
> Mike  KC4TOS
>
> On 5/13/2016 9:55 PM, George Babits wrote:
>> I have a question concerning the use of the 4 channel Bendix TA-12 
>> transmitters.  Amongst my plunder is a Bendix control box with 8 channels 
>> on it.  The frequencies listed for channels 1 through 4 correspond to the 
>> available frequencies of the TA-12 channels 1 through 4.  Then, channels 
>> 5 through 8 correspond to frequencies within the TA-12 frequency ranges 
>> of channels 1 through 4 also.  It looks like this control box was 
>> designed to provide 8 channels using a pair of TA-12 transmitters.
>>
>> But wait, there's more.  I  have a junction box with a cable/plug that 
>> mates with the control box.  This junction box also has two cables with 
>> connectors for the TA-12 transmitter and other (receiver, power supplies, 
>> etc) equipment.
>>
>> Can anyone confirm that the TA-12 transmitters were  configured in pairs 
>> to provide 8 channels?
>>
>> Thanks,
>> George
>> W7HDL
>> ______________________________________________________________
>> Milsurplus mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/milsurplus
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Milsurplus at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>>
>