[Milsurplus] TA-12 XMTR in Pairs?

[Michael Hanz]

What's the Bendix number on the control box, George?  The MT-34/TA-2 
also had 8 channels.

73,
Mike  KC4TOS

On 5/13/2016 9:55 PM, George Babits wrote:
> I have a question concerning the use of the 4 channel Bendix TA-12 
> transmitters.  Amongst my plunder is a Bendix control box with 8 
> channels on it.  The frequencies listed for channels 1 through 4 
> correspond to the available frequencies of the TA-12 channels 1 
> through 4.  Then, channels 5 through 8 correspond to frequencies 
> within the TA-12 frequency ranges of channels 1 through 4 also.  It 
> looks like this control box was designed to provide 8 channels using a 
> pair of TA-12 transmitters.
>
> But wait, there's more.  I  have a junction box with a cable/plug that 
> mates with the control box.  This junction box also has two cables 
> with connectors for the TA-12 transmitter and other (receiver, power 
> supplies, etc) equipment.
>
> Can anyone confirm that the TA-12 transmitters were  configured in 
> pairs to provide 8 channels?
>
> Thanks,
> George
> W7HDL
> ______________________________________________________________
> Milsurplus mailing list
> Home: http://mailman.qth.net/mailman/listinfo/milsurplus
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Milsurplus at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>