[Milsurplus] Needed - Jack For U-174/U Plug

[Michael D. Harmon]

I need a panel-mount jack for a U-174/U plug.  This is the plug used for 
the David Clark H10-76 military
headset - the familiar, green-domed headset worn by helicopter pilots, 
AWACS operators, and countless
other military users.  The U-174/U is a stubby, 4-conductor plug with 
tip, sleeve and two rings as shown
in the following graphic (hope this goes through)


The H10-76 headset has 19-ohm earphone elements wired in parallel, 
almost a perfect match for radios
with an 8-ohm audio output.  The standard military mike element 
(M-87/AIC) is a 5-ohm dynamic unit,
but can easily be replaced by a number of mike elements designed for 
different transmitter input impedances
and audio sensitivity requirements.

I have two of these great headsets I'd like to use with my HF radio gear 
for hands-free operation.  I plan to build
a small interface box with audio matching network, input jacks for the 
headset and a foot-pedal PTT switch,
and an output pigtail going to my HF gear.

Does anyone have a matching jack for the U-174/U plug they would part with?

Please let me know if so.

Mike Harmon, WB0LDJ
mharmon at att dot net