[Milsurplus] Antenna Gaskets?

[Mike Hanz]

Tires still have inner tubes?

Heh, heh, just teasing, John.  It's just that I haven't seen an inner 
tube for quite a while.

I use the stuff from McMaster-Carr - 
http://www.mcmaster.com/#standard-rubber-gaskets/=q4tjfe

A 12"x12" square of  1/16" SBR in "Resilient Rubber Gaskets" is only 
$3.12.  Neoprene is only $3.92.

      73,
  - Mike  KC4TOS




On 1/6/2014 9:41 AM, J. Forster wrote:
> It came through a day or so ago.
>
> I don't know specifically about your antennas, but I have the gaskets for
> several antennas (MN-26 loop, APN-1, APN-2) and they are all dark
> grey/black 1/16" sheet rubber (Neoprene, I suspect. They are not
> perished). It looks like you could just cut up an old tire inner tube to
> the correct shape and done.
>
> -John
>
> ===============
>
>
>> Don't recall seeing this come back through the group.  May have bounced,
>> maybe I just missed it...
>>
>> I have several 37P4 and 37P5 glide slope antennas.  I only have one
>> gasket.
>>
>> Any gasket sources out there?