[Milsurplus] Another ARC-5 Transmitter Question

[Peter Gottlieb]

Anyone put one of these transmitters in pspice?


On 10/31/2013 2:40 PM, J. Forster wrote:
> Suppose you have a stock configuration ARC-5 transmitter rack with 2 or
> more transmitters.
>
> Am I correct that ALL the 1625s will have both Plate and Screen voltages
> applied, but only the Tx selected for use will have the Cathodes of the
> finals grounded. The other tubes will be pretty much fully cut-off because
> of the 51k R-75 Cathode resistor.
>
> Also, is the connection through C-62 in the T-22 essentially negative RF
> FB around the final?
>
> -John
>
> ==================
>
> ______________________________________________________________
> Milsurplus mailing list
> Home: http://mailman.qth.net/mailman/listinfo/milsurplus
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Milsurplus at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>