[Milsurplus] Attaching cable to MS connectors

[J. Forster]

Ooops: 600 mA, not 60

-John

===============


> Hi,
>
> I got the dyno in and it runs very well, putting out about 259 VDC at 24
> VDC in. It draws about 60 mA, no load, and is very quiet. I've not fit
> checked it in the ARB as yet.
>
> Thanks very much.
>
> -John
>
> ===========
>
>
>
>> I'm about 95% sure that it is for the ARB.  The mounting arrangement
>> (four
>> captive screws on outriggers) and the terminal board matches the outline
>> drawing and the rather unusual 260VDC output voltage rating matches a
>> chart in
>> the manual.  The only photograph in the manual that shows the dynamotor
>> isn't much help but what is visible looks like the unit on eBay aside
>> from
>> contractor.  But the manual does say that the dynamotors were made by
>> several
>> different ones.
>>
>> In a message dated 10/23/2012 18:42:06 PM Central Daylight Time,
>> jfor at quikus.com writes:
>>> Hi Mike,
>>>
>>> Yes. Might be. I don't have the doc to check. Maybe Robert can answer
>>> back
>>> in time.
>>>
>>> Thanks very much,
>>>
>>> -John
>>>
>>> ===================
>>>
>>>
>>> >OJohn,
>>> >
>>> >Was it you who was looking for an ARB dynamotor?  I think this might
>>> be
>>> >one, though I didn't check the number.  Gotta be quick, though.
>>> >
>>> >
>>> http://www.ebay.com/itm/WESTINGHOUSE-DYNAMOTOR-957962-A-/320999817765?pt=US_Radio_Comm_Device_Power_Supplies&hash=item4abd148225
>>> >
>>> >
>>>
>>
>> Robert Downs - Houston
>> wa5cab dot com (Web Store)
>> MVPA 9480
>
>
> ______________________________________________________________
> Milsurplus mailing list
> Home: http://mailman.qth.net/mailman/listinfo/milsurplus
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Milsurplus at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>