[Milsurplus] Attaching cable to MS connectors
J. Forster
jfor at quikus.com
Thu Oct 18 19:22:59 EDT 2012
In my experience, the outer threaded ring is more useful for unmating the
connectors, not mating them.
-John
=============
> All: For use in the shack, I have found that leaving off the 7-turn
> locking
> ring on the MIL-C-5015 series connectors is usually adequate practice.
> Connector pin friction is usually plenty to hold the connector in place.
> It's different if it's the quarter-turn connectors.
>
> Thanks,
> Dave WB4FUR
>
> -----Original Message-----
> From: milsurplus-bounces at mailman.qth.net
> [mailto:milsurplus-bounces at mailman.qth.net]On Behalf Of Bill Cromwell
> Sent: Wednesday, October 17, 2012 8:18 PM
> To: milsurplus at mailman.qth.net
> Subject: Re: [Milsurplus] Attaching cable to MS connectors
>
>
> Hey...
>
> Make sure any collars, rings, threaded parts are not slipped on wrong
> side to! I did THAT *once*.
>
> 73,
>
> Bill KU8H
>
>
> On Wed, 2012-10-17 at 23:01 -0400, COURYHOUSE at aol.com wrote:
>> never forget the threaded collar.... did that once.... ONLY ONCE!
>>
>> Ed#
>>
>>
>
>
> ______________________________________________________________
> Milsurplus mailing list
> Home: http://mailman.qth.net/mailman/listinfo/milsurplus
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Milsurplus at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Milsurplus mailing list
> Home: http://mailman.qth.net/mailman/listinfo/milsurplus
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Milsurplus at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
More information about the Milsurplus
mailing list