[Milsurplus] BC-375 HV fuses needed - PHOTOS

[C.Whitaker]

de WB2CPN
Why can't you replace the fuse wire inside the fuse holder?
Look for the proper fuse wire.  That's all.
73  Clete





On 9/12/2011 2:33 AM, Jack Antonio wrote:
> On 9/12/2011 1:19 AM, Laura and Jim wrote:
>> These fuses are used in the PE-73 and the BC-375E (one up behind the T-U, couple of spares in clips below on the TX frame)
>>
>> Bussman fuse
>> 2-15/16" long, 3/8" diameter.
>>
>> What I need is the 1/2 A version.
>
> These fuses are BUSS HVA 1/2, and are still available
> new, but Mouser wants 14 bucks each for them.
>
> Be wary of new old stock FU-12A fuses, they have a history
> of opening up over time. I have half a dozen NOS, unused, and
> open FU-12A fuses. (No, I didn't pay 14 bucks each for them).
>
> Jack Antonio WA7DIA/4
> ______________________________________________________________
> Milsurplus mailing list
> Home: http://mailman.qth.net/mailman/listinfo/milsurplus
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Milsurplus at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>