[Milsurplus] BC-375 HV fuses needed - PHOTOS

[Laura and Jim]

These fuses are used in the PE-73 and the BC-375E (one up behind the T-U, couple of spares in clips below on the TX frame)

Bussman fuse 
2-15/16" long, 3/8" diameter.

What I need is the 1/2 A version.

Go here for photos of an FU-18A 1kV / 1A I'm using now (Thanks, Dennis!).

http://www.flickr.com/photos/radio-tuber/6139418552/in/photostream
http://www.flickr.com/photos/radio-tuber/6138868315/in/photostream

Thanks for checking!

If there's enough clearance, I may fabricate brackets to adapt a modern one into the rig.

Ran fine at the hamfest on the dyno; 45W out. Loaded nicely into a 20' whip on 75M and have the RF burns to prove it! Tuned the TX output to talk to 50 ohm co-ax, used an L network after that and a 4:1 unun(?) on the end of the co-ax at the base of the whip. 

The BC-348R went dead somewhere between home and the hamfest - lit up nicely, but dead as a post. Borrowed a SWL radio and used it instead for monitoring.