[Milsurplus] 618T/ARC-94

[Ray Fantini]

Thinking of starting a 618T (ARC-94) project but I am in need of couple parts, first wanted to know if anyone has a URM-157 test set they can be talked out of?  I do not need the entire set only the frame so I can recover the female plug to connect to the back of the 618T and the plug to connect to the C-3940 control head. Don’t need any of the cables, meter, control head or other stuff in the test set only the two connectors so if someone has a damaged or dead URM-157 frame that would work out great.  Also if anyone has the DC version of the High Voltage Power supply (A8) that can be put to good use also although will more then likely gut the 115/400 cycle three phase supply (A7 522-1230) keeping T2 for the filament and the overload stuff around K3 and build a external 60 cycle AC supply for developing the 1.5 kV plate supply and the 400 volt source. Developing the 115 signal phase 400 cycles for all the servos and the LVPS is no issue but the HV requires little more three phase 400 cycles then I have around the house. So at this point I have the radio, head, and rack (less connector) but would be interested in anything anyone else has, a spare ATU would be good also so I would not have to steal the one from the ARC-38. Please reply off list.
Ray Fantini KA3EKH