[Milsurplus] Need help with ART-13

[mac]

Bob,

Not quite sure why a delay would be required/desirable here.  Are you  
running HV into the set continuously instead of only on PTT (like the  
dynamotor does)?

Dennis D. W7QHO
Glendale, CA

***********

On Mar 8, 2011, at 4:28 PM, BOB wrote:

>    I run a time delay from the 115V input to kick in the 400 and 1200
> volt primary's on my P.S. The 28 volt supply comes on when the main  
> switch
> is turned on. The orginal design had the delay tube turning on the  
> primary's
> but I found that to be a problem. I am about to install a contactor
> activated by the delay to do the heavy lifting. Should work out much  
> better
> Good luck
> There is a Yahoo Art-13 site that is great for this kind of info.