[Milsurplus] R388 Audio

[Greg Mijal]

larry:
You can run both at the same time but you have to figure that more audio 
power is coming out of the receiver.  The volume available will be less if 
going to two speakers.
73's
Greg
WA7LYO
Kinston, NC
----- Original Message ----- 
From: <telegrapher at q.com>
To: <milsurplus at mailman.qth.net>
Sent: Wednesday, July 20, 2011 3:30 PM
Subject: [Milsurplus] R388 Audio


>
> Is there any reason you can't hook up to the 600 ohm output and 3.2 ohm 
> output at the same time.  I want a speaker on the 3.2 ohm output and to 
> runa  cable from the 600 ohm output at the same time to an ST-6 for RTTY 
> reception.  I did notice that there was a reduction in audio from the 3.2 
> ohm connection when i hooked the ST-6 to the 600 ohm terminals.  Is that 
> right or should i not use them both at the same time/
>
> Larry
> W0OGH
> ______________________________________________________________
> Milsurplus mailing list
> Home: http://mailman.qth.net/mailman/listinfo/milsurplus
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Milsurplus at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html