[Milsurplus] ARB dynamotor

[Pete Lancashire]

just a rambling thought

I have a NIB ARC-5 receiver that someday want to setup. I also have a DY from
another ARC-5 that is trashed, sat outside for 20+ years, filled with water etc.

If one was to gut it, put a solid state power supply inside, etc .. one could
even put a sampled sound generator/amplifier/speaker inside to make the correct
running sound.

Just a thought

-pete


On Tue, Jan 18, 2011 at 1:24 PM, Clare Owens <clare.owens at gmail.com> wrote:
> Does anyone here know the designation or the ratings of the ARB receiver
> dynamotor?  My ARB is missing the dynamotor but I have a number of 28V
> dynamotors with outputs in the 250-285V and .06 to .1A range that I probably
> could make fit.  The Command Receiver sized units would fit most easily and
> I have one particular NOS Redmond unit model 5056 with no base plate but a
> convenient saddle casting with a rating of 250V .06A that's a little shorter
> than the usual Command Receiver dynamotor and it'd fit in very nicely once I
> made a plate for it.  It also has end louvers.  But I'm concerned about the
> current draw of the ARB even without the external homing unit.
>
> Thanks,
>
> Clare Owens  N2RJB
> ______________________________________________________________
> Milsurplus mailing list
> Home: http://mailman.qth.net/mailman/listinfo/milsurplus
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Milsurplus at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>