[Milsurplus] Connector source

[J. Forster]

Did you check the 75 and 93 Ohm SMCs?

-John

==================

> The connector resembles a SMC from MIL-STD-348, however, it is larger.
> The flats across the tightening nut are 8mm vice the specified 6mm for the
> SMC.
> A better description would be a SMC connector built to SMA dimensions.
>
> 73
> Glenn
> WB4UIV
>
>
> At 12:45 PM 8/7/2011, J. Forster wrote:
>>Compare with SMB and SMC, and not only the 50 Ohm. Look at 75 and 93 Ohm
>>variants too.
>>
>>-John
>>
>>================
>>
>>
>> > I have some TRW Microwave detectors that have a SMA connector on one
>> > end and what looks like, but is not, a reverse SMA connector on the
>> other
>> > end.
>> > I have located one connector that will fit the non SMA side.
>> > The markings on the connector are GREMAR 6488.
>> > Google found nothing useful.
>> > Any ideas as to where I can locate some compatible connectors?
>> >
>> > Thanks
>> > 73
>> > Glenn
>> >
>> >
>> > ______________________________________________________________
>> > Milsurplus mailing list
>> > Home: http://mailman.qth.net/mailman/listinfo/milsurplus
>> > Help: http://mailman.qth.net/mmfaq.htm
>> > Post: mailto:Milsurplus at mailman.qth.net
>> >
>> > This list hosted by: http://www.qsl.net
>> > Please help support this email list: http://www.qsl.net/donate.html
>> >
>> >
>
>