[Milsurplus] Connector source

[Glenn Little WB4UIV]

The connector resembles a SMC from MIL-STD-348, however, it is larger.
The flats across the tightening nut are 8mm vice the specified 6mm for the SMC.
A better description would be a SMC connector built to SMA dimensions.

73
Glenn
WB4UIV


At 12:45 PM 8/7/2011, J. Forster wrote:
>Compare with SMB and SMC, and not only the 50 Ohm. Look at 75 and 93 Ohm
>variants too.
>
>-John
>
>================
>
>
> > I have some TRW Microwave detectors that have a SMA connector on one
> > end and what looks like, but is not, a reverse SMA connector on the other
> > end.
> > I have located one connector that will fit the non SMA side.
> > The markings on the connector are GREMAR 6488.
> > Google found nothing useful.
> > Any ideas as to where I can locate some compatible connectors?
> >
> > Thanks
> > 73
> > Glenn
> >
> >
> > ______________________________________________________________
> > Milsurplus mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/milsurplus
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Milsurplus at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> >
> >