[Milsurplus] BC-348-R

[mac]

Joe,

It's set up for the right output impedance for your speaker.  The  
BC-348 was designed for headphone use and you will have to keep the  
gain control cranked way up to drive a speaker.  Can provide you with  
a simple, reversible second detector mod that helps if you would like.

Dennis D. W7QHO
Glendale, CA



On Mar 20, 2010, at 8:38 AM, Joe Connor wrote:

>
> I need a little help. I just picked up a nice, unhacked BC-348-R. On  
> the front,there is a label that says: "NOTICE: connected for low  
> impedance output." What impedance is that? I used a speaker with 500- 
> ohms impedance and the output is a bit low. What should I be using?
>
>                  Joe Connor
>
>
>
> ______________________________________________________________
> Milsurplus mailing list
> Home: http://mailman.qth.net/mailman/listinfo/milsurplus
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Milsurplus at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html