[Milsurplus] ARB

[WA5CAB at cs.com]

Thanks, Meir.  Brad, the hard copy is $21.50 plus shipping.  If I ever win 
the lottery, I'll put all of my holdings up on the web.  But at the moment, they 
are part of how we keep the bills paid.

The output ratings of the original dynamotor are 260 VDC and 70 MADC.  The 
Typical Voltage and Current chart shows the dynamotor filter output as 231 volts 
so 225 is quite close.


In a message dated 10/22/2008 2:27:38 PM Central Daylight Time, 
wf2u at ws19ops.com writes: 
> I never found an ARB manual for download either.
> I bought a nice ARB manual reproduction from Robert Downs.
> (I have an ARB receiver/ATD transmitter combo on the air).
> The receiver is surprisingly a good performer, although I use an  
> external audio filter with it for less headache while copying CW on a  
> crowded band. It's not bad on AM, and stable enough, with a fairly  
> good level of BFO injection to copy SSB.
> Clean the tuning gear and the main tuning cap bearings, and lube the  
> gear properly, otherwise the tuning is sort of jerky if the old grease  
> is dry.
> 
> Good luck,
> 
> 73, Meir WF2U
> Landrum, SC
> 
> Quoting Brad Latta <bl_6000 at yahoo.com.au>:
> 
> >I've recently acquired an ARB receiver, it's previous owner has put   
> >in a 14V dynamotor, the HT is correct at 225V, but none of the   
> >relays will pull in. Is there a manual scanned somwhere in PDF that   
> >I can obtain or download? I've searched on most sites, no-one has   
> >yet put up an ARB manual!
> >                                                                     Brad
> 

Robert Downs - Houston
wa5cab dot com (Web Store)
MVPA 9480
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.qth.net/pipermail/milsurplus/attachments/20081022/358afec6/attachment.htm