[Milsurplus] ARB

[wf2u at ws19ops.com]

Brad,

I never found an ARB manual for download either.
I bought a nice ARB manual reproduction from Robert Downs.
(I have an ARB receiver/ATD transmitter combo on the air).
The receiver is surprisingly a good performer, although I use an  
external audio filter with it for less headache while copying CW on a  
crowded band. It's not bad on AM, and stable enough, with a fairly  
good level of BFO injection to copy SSB.
Clean the tuning gear and the main tuning cap bearings, and lube the  
gear properly, otherwise the tuning is sort of jerky if the old grease  
is dry.

Good luck,

73, Meir WF2U
Landrum, SC

Quoting Brad Latta <bl_6000 at yahoo.com.au>:

> I've recently acquired an ARB receiver, it's previous owner has put   
> in a 14V dynamotor, the HT is correct at 225V, but none of the   
> relays will pull in. Is there a manual scanned somwhere in PDF that   
> I can obtain or download? I've searched on most sites, no-one has   
> yet put up an ARB manual!
>                                                                     Brad
>
>
>       Make the switch to the world&#39;s best email. Get Yahoo!7   
> Mail! http://au.yahoo.com/y7mail
> ______________________________________________________________
> Milsurplus mailing list
> Home: http://mailman.qth.net/mailman/listinfo/milsurplus
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Milsurplus at mailman.qth.net
>