[Milsurplus] Needed: Tubes & more for an ART-13

[Mike Hanz]

Mike did his usual careful and definitive rundown on the options.  A 
number of these options can be viewed at 
http://aafradio.org/flightdeck/b29.htm

Mike Morrow wrote:

>  The U-11 is only required if you are using the SA-22/ART-13 LF/MF
>  antenna switch (with CU-25 or CU-26/ART-13 external LF/MF tank coil)
>  or the CU-32/ART-13A (external LF/MF tank coil and antenna switch),
>  either of which are only required for LF/MF operation with the
>  O-16/ART-13 or O-17/ART-13A LF/MF unit. The U-11 causes the proper
>  antenna switching to occur in the SA-22 or CU-32. If you are
>  attaching these units, you'll also need a U-12/U.
>
>
>  The U-8/U is only required if you are using the remote control units
>  C-87/ART-13, C-405A/A, or C-740/ART-13. If the C-87 or C-740 control
>  is to be used, you'll also need a U-6/U.
>
>  For ham utilization of the T-47 where no attempt is being made to
>  faithfully reproduce the military system configuration, only the
>  U-7/U is required in order to provide power connections and PA
>  current metering circuit connection to the T-47. If you are
>  connecting to a DY-11, -12, -17, or 17A dynamotor, you'll also need a
>  U-9/U (to T-47) and a U-10/U (to 28 vdc).