[Milsurplus] "H" and "I"

[James M. Walker]

No reason it shouldn't, the harnesses in both are 
identical except for a few wire colors, check the 
rear of the manual it will give you all the info, to be
sure.
YMMV
WB2FCN

----- Original Message ----- 
From: "Rick Brashear" <rickbras at airmail.net>
To: <milsurplus at mailman.qth.net>
Sent: Tuesday, March 28, 2006 12:22 PM
Subject: [Milsurplus] "H" and "I"


> I am thinking of replacing the hacked up front panel of the "H" model 
> with a better looking "I" model panel.  Are they identical except for 
> the nomenclature tags?  I think they all screw on, so it would be no 
> problem to switch them.  The "H" front panel has a big hole (3" plus 
> diameter) hacked and I do mean HACKED in it where someone had mounted an 
> ammeter, most likely for setting the modulation without a BC-614 speech 
> amp.  Rather than patch the hole I think I'll switch them out and worry 
> about the hole when it comes time to restore the "I" model.  Can anyone 
> think of a reason this would not work?
> 
> Thanks,
> Rick/K5IZ
> 
> 
> ______________________________________________________________
> Milsurplus mailing list
> Home: http://mailman.qth.net/mailman/listinfo/milsurplus
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Milsurplus at mailman.qth.net
> 
> 
>