[Milsurplus] FTGH mil-type xtals

[ejones at hiwaay.net]

de N4TGC Eric A. Jones, 6537 County Road 61, Florence AL 35634

In looking for a 10.254166mc (123.05mc) CR-1 (ARC 14958) to go in a T-11,
13, or 363 (ARC Type 12) tx,  I realized I have some xtals that may be of
use to someone else - FTGH:

1. a couple of CR-15/U ( big three-legged jobs I think are used in TCS):
both 79.991kc

2. a pair of BC-610 (FT-171) biggies, both 2360kc (order # 18229-PH-51)

3. another FT-171, marked 'for BC-499-A or BC-500-A', also FT-171.  A Fred
Link xtal, labeled 'second oscillator' - 5456kc

4. Midwest xtal holder MC-2, cylindrical style - bakelite with aluminum top
labeled 7134kc.  Note that there is NO xtal inside - this is just the
holder!

5. four CR-1 (somewhat larger than 243, and with bigger pins - izzat same
as FT-241?): a CR-1B/AR in 7300kc;  an 8007.69kc, an 8223.077kc, and a
modernish metal-cased v. in 3453.5kc marked "18s, trans".

5A. seven more alike the above, marked CR-1A/AR and equiv., in 7877.77kc
(141.8T) and 8112.5kc (141.8R); three 121.9mc (10158.33kc), two 121.7
(10141.66), 122.5mc (10208.33kc), and 126.18mc (10515.000)

6. a quad of BAD FT-243's with removable covers - originally  7126, 7140,
7160, and 7165kc, none osc correctly

7.an FT-243 for Channel 355  (7800kc) dated 'yesterday': Oct 19, 1944

8. two largish 'Marconi Canada' xtals - pin spacing is the same 3/4" as the
FT-171, but with 1/8" solid pins rather than banana - both 8960kc

9. a BC-669 rcvr xtal DC-35, Chan 2816kc (actual 3201kc, for 385kc i.f.)
Has same pin spacing as #8, but larger in dia. (5/32"), also solid

10. another xtal with 3/4" pin spacing of the 1/8" Marconi Canada size,
labeled Apelco (applied Electronics) - 3193kc

I also have a selection of CB and 2-3mc xtals, but I'll list them elsewhere
- query if you're not on the mailman.qth.net BA list.  Anybody got any ARC
Type 12 xtals or C-boxes, access., anything?
	e