[Milsurplus] OS-8C/U Question

[Bob Camp]

Hi

There are a lot of variables so this will ultimately be a cut and try 
sort of thing.

I would try taking the 22 ohm resistors to 120 ohms. I would add a 47 
ohm resistor in series with the other selenium. If you are replacing 
the 6X4 as well (a good idea) I would put a 47 ohm resistor in series 
with it as well.

	Take Care!

		Bob Camp
		KB8TQ


On Nov 6, 2004, at 10:10 PM, Mike Hardie wrote:

> The current project is getting an OS-8 'scope running.  Does anyone 
> have
> information on replacing the selenium rectifiers (CR101,102,103) with
> silicon ones, namely what series resistance should be included to keep
> voltages the same?
> Mike VE7MMH
>
> ______________________________________________________________
> Milsurplus mailing list
> Home: http://mailman.qth.net/mailman/listinfo/milsurplus
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Milsurplus at mailman.qth.net
>