[Milsurplus] Dynamotor Mounting Studs

[B. Smith]

McMaster list the assemblies as  Slide Latches and the part that holds the
slide is a "stud".
However I have fabricated them (the studs) using a unthreaded portion of a
bolt and  inserting  it into a drill press and then use a file and a saw
blade as a lathing tools- crude but works fairly well.  You will have to cut
the bolt off even and drill and tap for mounting. ( I hope Mike H does not
read this.)
See page 2790 at McMaster  or do a "slide latch" search on the site.

http://www.mcmaster.com/

breck k4che
I annt got no lathe but I do have a drill press, welding equipment and a
grinder, with these items
one can  conquer the world.