[Milsurplus] RS-6 on the air (manual, radio, cable)

[WA5CAB@cs.com]

Ken & Group,

It's a very poor copy that someone did but I dug out TM 11-5820-474-14 and 
found the following:

In a message dated 1/17/2003 12:13:23 PM Central Standard Time, 
keng@moscow.com writes: 
> I have two of the cables used with the AN/GRC-109 to connect it to 
> a GN-58/58-A/43. These cables have a small box near the 
> transmiter/receiver end. In that box is a VR tube, well padded with 
> rubber, and on the box are two connectors into which are plugged 
> the transmitter and receiver cables.
> 

This is Voltage Regulator CN-690/GRC-109

> I have never seen or heard of any other cables for the GRC-
> 109/GN-58 combo before.
> 

This is the 7' Power Cable (no nomenclature that I could find) shown on page 
7 of the TM.  It connects the hand generator to the large power supply 
(PP-2684/GRC-109).  The TM also shows the hand generator connected directly 
to the transmitter but I don't see where it explains what cables to use to do 
this.

A junked out CN-690 or PP-2684 might be a starting point for using the DY-88 
or DY-105.  The receiver voltage regulator would come out.  Cable to the 
generator might not have the LV wire for the receiver so might have to be 
modified.

73
Robert Downs
Houston
<wa5cab@cs.com>


--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---