[McHUG] Tony Parks - PIC program

[Peter Morton]

Below is a reply sent by Tony Parks on the Yahoo Softrock forum regarding programming of the PIC on the XTALL daughter board.  He sent this while we were eating at Stables last night.  I assume he will include the same software in the Lite+Xtall.

-Pete

Re: [softrock40] Xtall Daughterboard Program 


Hi Don,

The PIC sent with the daughter board kit has Tom's second version of the XTALL code and gives the follow set of center frequencies available by DIP switch selection


DIP switch code (1 2 3 4), ON = 1

0000 Si570 default frequency

0001    3.52

0010    3.56 

0011    3.825

0100    7.02

0101    7.06

0110    7.12

0111    10.12

1000    14.02

1001    14.06

1010    14.22

1011    21.02

1100    21.06

1101    21.15

1110    28.02

1111    28.09

73,
Tony KB9YIG