[MCARC] CDE TR44 series 3 rotor control

[Mike Stillwell]

I think Hygain bought CDE and then MFJ bought Hygain.MS
----- Original Message -----
From: Michael Philbrick <philbrick52 at gmail.com>
To: Marshall County ARC <mcarc at mailman.qth.net>
Sent: Sat, 08 May 2021 11:20:05 -0400 (EDT)
Subject: Re: [MCARC] CDE TR44 series 3 rotor control

I think the difference in the 2 at Bruces is one's front panel shows HyGain and other CDE.

On Sat, May 8, 2021 at 10:18 AM Michael Philbrick <philbrick52 at gmail.com> wrote:
Maybe. It does not have a label but looks the same as one labeled model H-IV/CD-45 at KB0DEU site.
http://normsrotorservice.com/serv3%20identify.htm

I read this website this morning so believe it should be correct model for you.
No charge except maybe some elmering. I looked this morning after reading that article. The rotor here is Alliance brand.



On Fri, May 7, 2021 at 10:13 PM Mike Stillwell <gwtouring at bluevalley.net> wrote:
Further research indicates that the Ham M & Ham IV control will work with the TR44 Series 3. Do you have an extra? Or a control with no rotor?ms
----- Original Message -----
From: Michael Philbrick <philbrick52 at gmail.com>
To: Marshall County ARC <mcarc at mailman.qth.net>
Sent: Fri, 07 May 2021 16:35:38 -0400 (EDT)
Subject: Re: [MCARC] CDE TR44 series 3 rotor control

I may have one to fit your needs. I don't know about series though. It is a ham iv or cde. We've been trying to update KB0DEU as I noticed the other day his one that looked something like your picture here was not working. I cannot remember the model numbers. It has 8 wire connections. May be heading to KB0Deu qth later today.

On Fri, May 7, 2021 at 1:52 PM Mike Stillwell <gwtouring at bluevalley.net> wrote:
Hello all.
I knew I had an old rotor stored away and I dug it out and disassembled, cleaned and put new lube on the bearings. I do not have a series 3 controller, which is different than the series 1 and 2. I have a series one rotor and controller which we have used on field day for the YAGI Hf antenna. If you know of some one who has a controller and wants to sell Let me know. And if you know someone who needs a TR44 rotor series 3 I would be interested in selling the one I just rebuilt. Pix attached.73ac0i
______________________________________________________________

MCARC mailing list

Home: http://mailman.qth.net/mailman/listinfo/mcarc

Help: http://mailman.qth.net/mmfaq.htm

Post: mailto:MCARC at mailman.qth.net


This list hosted by: http://www.qsl.net

Please help support this email list: http://www.qsl.net/donate.html
-- 
Michael PhilbrickOdd Jobs TechnicianRetired Guys LLC803 N 8thSeneca, KS 66538(785) 294-2719mphilbrick52 at gmail.com

______________________________________________________________

MCARC mailing list

Home: http://mailman.qth.net/mailman/listinfo/mcarc

Help: http://mailman.qth.net/mmfaq.htm

Post: mailto:MCARC at mailman.qth.net


This list hosted by: http://www.qsl.net

Please help support this email list: http://www.qsl.net/donate.html
-- 
Michael PhilbrickOdd Jobs TechnicianRetired Guys LLC803 N 8thSeneca, KS 66538(785) 294-2719mphilbrick52 at gmail.com
-- 
Michael PhilbrickOdd Jobs TechnicianRetired Guys LLC803 N 8thSeneca, KS 66538(785) 294-2719mphilbrick52 at gmail.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/mcarc/attachments/20210508/a1d76e5c/attachment-0001.html>