[MCARC] CDE TR44 series 3 rotor control

[Michael Philbrick]

I think the difference in the 2 at Bruces is one's front panel shows HyGain
and other CDE.


On Sat, May 8, 2021 at 10:18 AM Michael Philbrick <philbrick52 at gmail.com>
wrote:

> Maybe. It does not have a label but looks the same as one labeled model
> H-IV/CD-45 at KB0DEU site.
>
> http://normsrotorservice.com/serv3%20identify.htm
>
> I read this website this morning so believe it should be correct model for
> you.
>
> No charge except maybe some elmering. I looked this morning after reading
> that article. The rotor here is Alliance brand.
>
>
>
>
> On Fri, May 7, 2021 at 10:13 PM Mike Stillwell <gwtouring at bluevalley.net>
> wrote:
>
>> Further research indicates that the Ham M & Ham IV control will work with
>> the TR44 Series 3. Do you have an extra? Or a control with no rotor?
>> ms
>>
>> ----- Original Message -----
>> From: Michael Philbrick <philbrick52 at gmail.com>
>> To: Marshall County ARC <mcarc at mailman.qth.net>
>> Sent: Fri, 07 May 2021 16:35:38 -0400 (EDT)
>> Subject: Re: [MCARC] CDE TR44 series 3 rotor control
>>
>> I may have one to fit your needs. I don't know about series though. It is
>> a ham iv or cde. We've been trying to update KB0DEU as I noticed the other
>> day his one that looked something like your picture here was not working. I
>> cannot remember the model numbers. It has 8 wire connections. May be
>> heading to KB0Deu qth later today.
>>
>>
>> On Fri, May 7, 2021 at 1:52 PM Mike Stillwell <gwtouring at bluevalley.net>
>> wrote:
>>
>>> Hello all.
>>> I knew I had an old rotor stored away and I dug it out and disassembled,
>>> cleaned and put new lube on the bearings. I do not have a series 3
>>> controller, which is different than the series 1 and 2. I have a series one
>>> rotor and controller which we have used on field day for the YAGI Hf
>>> antenna. If you know of some one who has a controller and wants to sell Let
>>> me know. And if you know someone who needs a TR44 rotor series 3 I would be
>>> interested in selling the one I just rebuilt. Pix attached.
>>> 73
>>> ac0i
>>>
>>> ______________________________________________________________
>>>
>>> MCARC mailing list
>>>
>>> Home: http://mailman.qth.net/mailman/listinfo/mcarc
>>>
>>> Help: http://mailman.qth.net/mmfaq.htm
>>>
>>> Post: mailto:MCARC at mailman.qth.net
>>>
>>>
>>> This list hosted by: http://www.qsl.net
>>>
>>> Please help support this email list: http://www.qsl.net/donate.html
>>
>>
>>
>> --
>> Michael Philbrick
>> Odd Jobs Technician
>> Retired Guys LLC
>> 803 N 8th
>> Seneca, KS 66538
>> (785) 294-2719
>> mphilbrick52 at gmail.com
>>
>>
>> ______________________________________________________________
>> MCARC mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/mcarc
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:MCARC at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>
>
>
> --
> Michael Philbrick
> Odd Jobs Technician
> Retired Guys LLC
> 803 N 8th
> Seneca, KS 66538
> (785) 294-2719
> mphilbrick52 at gmail.com
>


-- 
Michael Philbrick
Odd Jobs Technician
Retired Guys LLC
803 N 8th
Seneca, KS 66538
(785) 294-2719
mphilbrick52 at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/mcarc/attachments/20210508/90a1a631/attachment.html>