[MAMS] PLL

[Zack Widup]

When I set up the group I set it up to allow some attachments. It is
an option in the group setup. I thought PDF's would be OK. It is set
up not to allow .exe, .com, .pif etc. The ones most likely to have
viruses inside.

So I might have to do some more experimenting with the settings to
find out why that one didn't go through.

73, Zack W9SZ


On 1/7/11, Dr. Gerald N. Johnson <geraldj at weather.net> wrote:
> qth.net mail lists don't allow attachments in general partly because of
> the bandwidth they could use on lists with many members and because
> attachments are a prime virus propagation scheme. The alternative is to
> upload the proposed attachment to a server with public access and report
> that URL here. I have access to such a server, but most ISPs have them
> for user web pages.
>
> 73, Jerry, K0CQ
>
> On 1/6/2011 9:59 PM, Zack Widup wrote:
>> Hi Mike,
>>
>> It was kind of an experiment to see if the attachment would go
>> through. I guess it didn't. It wasn't a huge file, only about 400k.
>>
>> 73, Zack
>>
>>
>> On 1/6/11, M Ragouzis<n0obi at yahoo.com>  wrote:
>>> Hi Zack
>>>
>>> I tried opening the attachment it was 1 kb and only opened a small page.
>>> I don't know if the problem is just my computer or not .
>>>
>>> Have a great new year.
>>> I have a question as to how many people in the group are close to St
>>> Louis
>>>   ?
>>> would this be a good start , any suggestions for a central point ?
>>> We should have a breakfast or lunch ?
>>> Any thoughts on this
>>>
>>> Thanks to all .
>>> Mike n0obi
>>> St Louis
>>> 73
>>>
>>>
>>>
>>> ________________________________
>>> From: Zack Widup<w9sz.zack at gmail.com>
>>> To: Mid-America Microwave Society<mams at mailman.qth.net>
>>> Sent: Thu, January 6, 2011 4:19:58 PM
>>> Subject: Re: [MAMS] PLL
>>>
>>> OK Wally, I'll look at my schedule and also the weather and see if
>>> Saturday or Sunday are possible. All the crops are out of the fields
>>> and the leaves off the trees now so we don't have those getting in the
>>> way.
>>>
>>> I have a couple MICROLO boards I made that I am mainly using the
>>> hairpin filters on, and a modified version to move the center of the
>>> hairpin filter frequency up to 1500 MHz. The KD6OZHPLL circuit or the
>>> modification of the oscillator circuit done by VE1ALQ seem to be the
>>> best circuits I've found for an accurate, stable, low phase noise LO
>>> but it's quite a bit of work to put them together. I got some of the
>>> MC145158 PLL chips from a ham friend but I've just about used up all
>>> of those. I did find some of the MC145158 in surface-mount form on
>>> eBay. That will help to shrink the board just a bit.
>>>
>>> I'm attaching the original article to see if it goes through. I
>>> haven't sent attachments to this group, yet.
>>>
>>> Zack W9SZ
>>>