[MAMS] PLL

[Dr. Gerald N. Johnson]

qth.net mail lists don't allow attachments in general partly because of 
the bandwidth they could use on lists with many members and because 
attachments are a prime virus propagation scheme. The alternative is to 
upload the proposed attachment to a server with public access and report 
that URL here. I have access to such a server, but most ISPs have them 
for user web pages.

73, Jerry, K0CQ

On 1/6/2011 9:59 PM, Zack Widup wrote:
> Hi Mike,
>
> It was kind of an experiment to see if the attachment would go
> through. I guess it didn't. It wasn't a huge file, only about 400k.
>
> 73, Zack
>
>
> On 1/6/11, M Ragouzis<n0obi at yahoo.com>  wrote:
>> Hi Zack
>>
>> I tried opening the attachment it was 1 kb and only opened a small page.
>> I don't know if the problem is just my computer or not .
>>
>> Have a great new year.
>> I have a question as to how many people in the group are close to St  Louis
>>   ?
>> would this be a good start , any suggestions for a central point ?
>> We should have a breakfast or lunch ?
>> Any thoughts on this
>>
>> Thanks to all .
>> Mike n0obi
>> St Louis
>> 73
>>
>>
>>
>> ________________________________
>> From: Zack Widup<w9sz.zack at gmail.com>
>> To: Mid-America Microwave Society<mams at mailman.qth.net>
>> Sent: Thu, January 6, 2011 4:19:58 PM
>> Subject: Re: [MAMS] PLL
>>
>> OK Wally, I'll look at my schedule and also the weather and see if
>> Saturday or Sunday are possible. All the crops are out of the fields
>> and the leaves off the trees now so we don't have those getting in the
>> way.
>>
>> I have a couple MICROLO boards I made that I am mainly using the
>> hairpin filters on, and a modified version to move the center of the
>> hairpin filter frequency up to 1500 MHz. The KD6OZHPLL circuit or the
>> modification of the oscillator circuit done by VE1ALQ seem to be the
>> best circuits I've found for an accurate, stable, low phase noise LO
>> but it's quite a bit of work to put them together. I got some of the
>> MC145158 PLL chips from a ham friend but I've just about used up all
>> of those. I did find some of the MC145158 in surface-mount form on
>> eBay. That will help to shrink the board just a bit.
>>
>> I'm attaching the original article to see if it goes through. I
>> haven't sent attachments to this group, yet.
>>
>> Zack W9SZ
>>
>>