[Lowfer] Basic Argo settings?

[STEVE MCDONALD]

Frank you may find something helpful here:

https://www.scribd.com/document/205707180/Argo-Tuning

----- Original Message -----
From: Frank O'Donnell <lfr at inkbox.net>
To: LowFER (US European <lowfer at mailman.qth.net>
Sent: Sat, 11 Sep 2021 11:50:40 -0600 (MDT)
Subject: [Lowfer] Basic Argo settings?

Hi, total LowFER and Argo newbie here.

I'm interested in setting up a receiver using an SDR controlled by SDR 
Console software, virtual audio cable, and a copy of Argo v1 build 149a 
newly downloaded from weaksignals.com. I've set SDR Console to 185.3 kHz 
in CW mode with a 1 kHz bandwidth. In Argo, I've filled in my callsign 
and grid, and set the soundcard input to the virtual audio cable that 
the SDR outputs to.

Anything else I need to configure? I see Argo defaults to QRSS 3 -- any 
tweaks to that and/or frequency desirable?

I'd seen a post to the effect that a basic user guide comes with Argo, 
but I haven't been able to find it.

Thanks much,

Frank K6FOD
DM04wc
Southern California


______________________________________________________________
Lowfer mailing list
Home: http://mailman.qth.net/mailman/listinfo/lowfer
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Lowfer at mailman.qth.net
Post must be less than 50KB total for message plus attachment!

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

-- 
WEB - "The VE7SL Radio Notebook": http://qsl.net/ve7sl/

VE7SL BLOG - "Homebrewing and Operating Adventures From 2200m to Nanowaves": 
http://ve7sl.blogspot.ca/