[Lowfer] Lowfer JH Loop Experiment

[N8OOU]

John,

Thanks for the info, I can relate your results to the tests I made using 
Quad Shield RG6 and RG8.

I shut down WM to listen overnight. Nothing seen until Gray Line this 
morning. See the first capture at;
http://qsl.net/n8oou/nov29210006.jpg

I have a second screen comming, it looks like you went qrt at 06:30 CST. 
The filename will be nov29210007.jpg when it's ready.

73   de   N8OOU - Mike Meek

On 11/29/21 8:58 PM, John Hamer wrote:
> Mike,
> 
> I actually have some pretty good size litz wire. It looks to be around 3 or
> 4mm diameter.  Ill see if there is a label on spool with more information.
> I'm not sure if the spool came with the wire.  I got it from my last job
> years ago when they were trashing it.
> 
> I still have everything breadboarded, so I'm not sure if that is causing
> any issues,  but I will solder it all together in the next few days
> 
> John
> 
> 
> On Mon, Nov 29, 2021, 9:52 PM N8OOU <n8oou at meekfarm.us> wrote:
> 
>> John,
>>
>> Good to have another loop experimenter. I am curious about what you are
>> using for the loop conductor. My experiments have shown the larger the
>> conductor, the better.
>>
>> Good Luck
>>
>> 73   de   N8OOU - Mike Meek
>>
>> On 11/29/21 5:17 PM, John Hamer wrote:
>>> I have a 12'x12' square loop setup. I am transmitting my usual mode of
>>> qrss60 and a graphic on 181.818KHz. I just got it going tonight and still
>>> have some work to do, but if you are looking for a challenge, give it a
>>> shot! It is aimed in the N/S direction.
>>> ______________________________________________________________
>>> Lowfer mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Lowfer at mailman.qth.net
>>> Post must be less than 50KB total for message plus attachment!
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>>
>> ______________________________________________________________
>> Lowfer mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Lowfer at mailman.qth.net
>> Post must be less than 50KB total for message plus attachment!
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>