[Lowfer] Lowfer JH Loop Experiment

[John Hamer]

Mike,

I actually have some pretty good size litz wire. It looks to be around 3 or
4mm diameter.  Ill see if there is a label on spool with more information.
I'm not sure if the spool came with the wire.  I got it from my last job
years ago when they were trashing it.

I still have everything breadboarded, so I'm not sure if that is causing
any issues,  but I will solder it all together in the next few days

John


On Mon, Nov 29, 2021, 9:52 PM N8OOU <n8oou at meekfarm.us> wrote:

> John,
>
> Good to have another loop experimenter. I am curious about what you are
> using for the loop conductor. My experiments have shown the larger the
> conductor, the better.
>
> Good Luck
>
> 73   de   N8OOU - Mike Meek
>
> On 11/29/21 5:17 PM, John Hamer wrote:
> > I have a 12'x12' square loop setup. I am transmitting my usual mode of
> > qrss60 and a graphic on 181.818KHz. I just got it going tonight and still
> > have some work to do, but if you are looking for a challenge, give it a
> > shot! It is aimed in the N/S direction.
> > ______________________________________________________________
> > Lowfer mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/lowfer
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Lowfer at mailman.qth.net
> > Post must be less than 50KB total for message plus attachment!
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> >
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>