[Lowfer] Argo Settings

[lmlangenfeld]

Although I haven't had problems copying virtually all the signals under discussion here, I have never seen the green bar on the left of the Argo screen anywhere near half-way up (regardless of the receivers AF gain setting). In fact, most of the time it's barely off the bottom and visible at all. The input level in the laptop is set a bit on the high side of mid range. Seems odd.Sent from my U.S. Cellular® Smartphone
-------- Original message --------From: Douglas Williams <williamsdoug1966 at gmail.com> Date: 12/14/20  10:31 AM  (GMT-06:00) To: "Discussion of the Lowfer (US, European,	& UK) and MedFer bands" <lowfer at mailman.qth.net> Subject: Re: [Lowfer] Argo Settings I do 50 sensitivity, 40 contrast. Adjust the receiver's volume until thegreen bar on the left side of the Argo screen is about at the halfway point.On Mon, Dec 14, 2020 at 12:51 AM KA4SEY <ka4sey at gmail.com> wrote:> I've been doing some listening on longwave lately and looking at Argo.> What would be a good balance for the sensitivity and contrast? Kasey> ______________________________________________________________> Lowfer mailing list> Home: http://mailman.qth.net/mailman/listinfo/lowfer> Help: http://mailman.qth.net/mmfaq.htm> Post: mailto:Lowfer at mailman.qth.net> Post must be less than 50KB total for message plus attachment!>> This list hosted by: http://www.qsl.net> Please help support this email list: http://www.qsl.net/donate.html______________________________________________________________Lowfer mailing listHome: http://mailman.qth.net/mailman/listinfo/lowferHelp: http://mailman.qth.net/mmfaq.htmPost: mailto:Lowfer at mailman.qth.netPost must be less than 50KB total for message plus attachment!This list hosted by: http://www.qsl.netPlease help support this email list: http://www.qsl.net/donate.html