[Lowfer] WM Lowfer - relocated antenna

[John Hamer]

Grabbers running on my site. Nothing yet
On Jul 8, 2016 10:13 AM, "John Hamer" <wilbur0611 at gmail.com> wrote:

> We had thunder storms here last night. If tonight is clear, ill try my new
> receive loop out.
> On Jul 8, 2016 7:47 AM, "N8OOU" <n8oou at meekfarm.us> wrote:
>
>> Warren - Jay;
>>
>> Thanks for the explanations. I re-read Bill's documents and sure enough,
>> he explained it in there also.  I think my mind was so sure it knew how a
>> loop radiated, it just ignored the "electrically small" detail.  There is
>> always something new to learn.
>>
>> 73   de   N8OOU - Mike Meek
>>
>> On 07/07/2016 04:18 PM, Warren wrote:
>>
>>> Mike,
>>>       For a full wave loop (like a cubical quad for example), you would
>>> be correct, maximum radiation off the 'faces' of the antenna i.e. at 90
>>> degrees to the plane of the loop. For an electrically small loop,
>>> maximum radiation is off the ends, if your loop wire is oriented N-S,
>>> then maximum radiation will also be N-S.
>>>     When I started out, I was under the same impression that you have,
>>> but Bill Ashlock corrected me.
>>>
>>> 73 Warren
>>>
>>>
>>> ****************************   snip    *********************
>> ______________________________________________________________
>> Lowfer mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Lowfer at mailman.qth.net
>> Post must be less than 50KB total for message plus attachment!
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>