[Lowfer] WM Lowfer beacon change

[Michael Sapp]

Mike: Noisy overnight but early this AM the noise subsided considerably. 
Not enough signal for a positive ID, but seems like I'm seeing the peak 
signal levels at the start and end of a few WM dashes near 185.301.  I did a 
calibration to my SpactraCom WWVB receiver reference LO (10Mz divided down 
to 100kHz) before I started and it is likely the LF converter and IF 
receiver slowly drifted up .2 Hz or so overnight. (No GPS reference lock).

https://www.dropbox.com/s/cqbwak2xd40gjct/CAPT0009.jpg?dl=0

A few traces is a start in the right direction, especially given the QRN 
levels over the past month....

73 Mike wa3tts


----- Original Message ----- 
From: "N8OOU" <n8oou at meekfarm.us>
To: "lowferlist" <lowfer at mailman.qth.net>
Sent: Wednesday, August 03, 2016 7:48 PM
Subject: [Lowfer] WM Lowfer beacon change


>I have moved the N-S loop to the E-W direction suspended in fairly open 
>space. I plan to run the beacon on this loop for the next few weeks. Again, 
>reports are welcomed.
>
> Thanks Mike
> -- 
> 73   de   N8OOU - Mike Meek
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html