[Lowfer] VLF 8820 Hz

[Douglas D. Williams]

https://dl.dropboxusercontent.com/u/33457409/8820Hz.jpg



On Sun, Nov 30, 2014 at 2:25 PM, Douglas D. Williams <kb4oer at gmail.com>
wrote:

> I did a quick calibration with WWVB and I don't think I'm more than 1 Hz
> off, so I switched to QRSS120 slow.
>
>
>
> On Sun, Nov 30, 2014 at 2:11 PM, Douglas D. Williams <kb4oer at gmail.com>
> wrote:
>
>> Unfortunately for me, that "wiggler" is very persistent, and seems
>> determined not to stray much more than 2 Hz from 8820.
>>
>> On Sun, Nov 30, 2014 at 2:08 PM, Douglas D. Williams <kb4oer at gmail.com>
>> wrote:
>>
>>> Yea, the slower you go on Argo the less bandwidth you see. I just assume
>>> Dex is GPS locked on his transmit frequency, and I know I won't be more
>>> than 2 Hz off on my receive frequency, so I settled on QRSS60.
>>>
>>>
>>>
>>> On Sun, Nov 30, 2014 at 2:02 PM, Lloyd Chastant <lloydc6 at gmail.com>
>>> wrote:
>>>
>>>> thats what I was concerned about using qrss 60 ..it being out of window
>>>> if
>>>> freq is not right on..Aw Well ..keep looking
>>>> Lloyd
>>>>
>>>> On Sun, Nov 30, 2014 at 7:00 PM, Douglas D. Williams <kb4oer at gmail.com>
>>>> wrote:
>>>>
>>>> > I switched to QRSS60 slow, which causes the "wiggler" to usually be
>>>> outside
>>>> > the Argo screen capture bandwidth.
>>>> >
>>>> >
>>>> >
>>>> > On Sun, Nov 30, 2014 at 1:56 PM, Lloyd Chastant <lloydc6 at gmail.com>
>>>> wrote:
>>>> >
>>>> > > What may be the best setting/mode to  try and see this.Just using
>>>> Argo
>>>> > now
>>>> > > at qrss60 cw 800Hz
>>>> > > ????
>>>> > > Lloyd
>>>> > >
>>>> > > On Sun, Nov 30, 2014 at 5:18 PM, Dexter McIntyre W4DEX <
>>>> > > dexter.mc at gmail.com>
>>>> > > wrote:
>>>> > >
>>>> > > > Presently have a carrier on 8820 Hz for the next few hours.
>>>> Unless
>>>> > > > something smokes I may run again this evening.
>>>> > > >
>>>> > > > Dex
>>>> > > > ______________________________________________________________
>>>> > > > Lowfer mailing list
>>>> > > > Home: http://mailman.qth.net/mailman/listinfo/lowfer
>>>> > > > Help: http://mailman.qth.net/mmfaq.htm
>>>> > > > Post: mailto:Lowfer at mailman.qth.net
>>>> > > > Post must be less than 50KB total for message plus attachment!
>>>> > > >
>>>> > > > This list hosted by: http://www.qsl.net
>>>> > > > Please help support this email list:
>>>> http://www.qsl.net/donate.html
>>>> > > >
>>>> > > ______________________________________________________________
>>>> > > Lowfer mailing list
>>>> > > Home: http://mailman.qth.net/mailman/listinfo/lowfer
>>>> > > Help: http://mailman.qth.net/mmfaq.htm
>>>> > > Post: mailto:Lowfer at mailman.qth.net
>>>> > > Post must be less than 50KB total for message plus attachment!
>>>> > >
>>>> > > This list hosted by: http://www.qsl.net
>>>> > > Please help support this email list: http://www.qsl.net/donate.html
>>>> > >
>>>> > ______________________________________________________________
>>>> > Lowfer mailing list
>>>> > Home: http://mailman.qth.net/mailman/listinfo/lowfer
>>>> > Help: http://mailman.qth.net/mmfaq.htm
>>>> > Post: mailto:Lowfer at mailman.qth.net
>>>> > Post must be less than 50KB total for message plus attachment!
>>>> >
>>>> > This list hosted by: http://www.qsl.net
>>>> > Please help support this email list: http://www.qsl.net/donate.html
>>>> >
>>>> ______________________________________________________________
>>>> Lowfer mailing list
>>>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>> Post: mailto:Lowfer at mailman.qth.net
>>>> Post must be less than 50KB total for message plus attachment!
>>>>
>>>> This list hosted by: http://www.qsl.net
>>>> Please help support this email list: http://www.qsl.net/donate.html
>>>>
>>>
>>>
>>
>