[Lowfer] VLF 8820 Hz

[Douglas D. Williams]

I did a quick calibration with WWVB and I don't think I'm more than 1 Hz
off, so I switched to QRSS120 slow.



On Sun, Nov 30, 2014 at 2:11 PM, Douglas D. Williams <kb4oer at gmail.com>
wrote:

> Unfortunately for me, that "wiggler" is very persistent, and seems
> determined not to stray much more than 2 Hz from 8820.
>
> On Sun, Nov 30, 2014 at 2:08 PM, Douglas D. Williams <kb4oer at gmail.com>
> wrote:
>
>> Yea, the slower you go on Argo the less bandwidth you see. I just assume
>> Dex is GPS locked on his transmit frequency, and I know I won't be more
>> than 2 Hz off on my receive frequency, so I settled on QRSS60.
>>
>>
>>
>> On Sun, Nov 30, 2014 at 2:02 PM, Lloyd Chastant <lloydc6 at gmail.com>
>> wrote:
>>
>>> thats what I was concerned about using qrss 60 ..it being out of window
>>> if
>>> freq is not right on..Aw Well ..keep looking
>>> Lloyd
>>>
>>> On Sun, Nov 30, 2014 at 7:00 PM, Douglas D. Williams <kb4oer at gmail.com>
>>> wrote:
>>>
>>> > I switched to QRSS60 slow, which causes the "wiggler" to usually be
>>> outside
>>> > the Argo screen capture bandwidth.
>>> >
>>> >
>>> >
>>> > On Sun, Nov 30, 2014 at 1:56 PM, Lloyd Chastant <lloydc6 at gmail.com>
>>> wrote:
>>> >
>>> > > What may be the best setting/mode to  try and see this.Just using
>>> Argo
>>> > now
>>> > > at qrss60 cw 800Hz
>>> > > ????
>>> > > Lloyd
>>> > >
>>> > > On Sun, Nov 30, 2014 at 5:18 PM, Dexter McIntyre W4DEX <
>>> > > dexter.mc at gmail.com>
>>> > > wrote:
>>> > >
>>> > > > Presently have a carrier on 8820 Hz for the next few hours.  Unless
>>> > > > something smokes I may run again this evening.
>>> > > >
>>> > > > Dex
>>> > > > ______________________________________________________________
>>> > > > Lowfer mailing list
>>> > > > Home: http://mailman.qth.net/mailman/listinfo/lowfer
>>> > > > Help: http://mailman.qth.net/mmfaq.htm
>>> > > > Post: mailto:Lowfer at mailman.qth.net
>>> > > > Post must be less than 50KB total for message plus attachment!
>>> > > >
>>> > > > This list hosted by: http://www.qsl.net
>>> > > > Please help support this email list:
>>> http://www.qsl.net/donate.html
>>> > > >
>>> > > ______________________________________________________________
>>> > > Lowfer mailing list
>>> > > Home: http://mailman.qth.net/mailman/listinfo/lowfer
>>> > > Help: http://mailman.qth.net/mmfaq.htm
>>> > > Post: mailto:Lowfer at mailman.qth.net
>>> > > Post must be less than 50KB total for message plus attachment!
>>> > >
>>> > > This list hosted by: http://www.qsl.net
>>> > > Please help support this email list: http://www.qsl.net/donate.html
>>> > >
>>> > ______________________________________________________________
>>> > Lowfer mailing list
>>> > Home: http://mailman.qth.net/mailman/listinfo/lowfer
>>> > Help: http://mailman.qth.net/mmfaq.htm
>>> > Post: mailto:Lowfer at mailman.qth.net
>>> > Post must be less than 50KB total for message plus attachment!
>>> >
>>> > This list hosted by: http://www.qsl.net
>>> > Please help support this email list: http://www.qsl.net/donate.html
>>> >
>>> ______________________________________________________________
>>> Lowfer mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Lowfer at mailman.qth.net
>>> Post must be less than 50KB total for message plus attachment!
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>>
>>
>>
>