[Lowfer] VLF Alphas

n8tl n8tl at woh.rr.com
Thu Nov 20 08:46:05 EST 2014


Doug:

Looks good!  I wonder if you can do the same thing with ARGO or 
SPECTRAN?  Is anyone using
these two for VLF work??  I ask this question since my computer 
operating system is Linux Mint 17, and, both of these programs run well 
on Linux.  Spectrum Lab to my knowledge will not perform on
Linux.  I can switch in a HDD to WINDOZ, but would rather not if I can 
get away with it.

I will be using Jay's low noise preamp in front of the Line In port, 
but, I need to finish it first.

I'll keep you posted, 73,

Tom N8TL



On 11/19/2014 03:58 PM, Douglas D. Williams wrote:
> Tom, Spectrum Lab is WAY more advanced than my skill set (or intelligence
> level). ;-)
>
> I just use the Quick Settings to get to "VLF Radio with station markers on
> frequency scale".
>
> Here is example of what it looks like at my QTH. The solid vertical lines
> are mostly (all?) military MSK stations for submarine comms or time
> standards.
>
> https://dl.dropboxusercontent.com/u/33457409/z1203%20ungrounded.JPG
>
> D.
>
> On Wed, Nov 19, 2014 at 3:54 PM, n8tl <n8tl at woh.rr.com> wrote:
>
>> Doug:
>>
>> The card will sample at 96 Khz.  I also have an EMU-0202 external card
>> which will do 192 Khz.
>>
>> Tom
>>
>>
>>
>> On 11/19/2014 09:41 AM, Douglas D. Williams wrote:
>>
>>> Forgot to mention the maximum frequency you will be able to see will be
>>> half the sampling rate of your sound card. So if you have a 48 kHz sound
>>> card, you will be able to see up to 24 kHz on Spectrum Lab's display.
>>>
>>> D.
>>>
>>> On Wed, Nov 19, 2014 at 9:38 AM, Douglas D. Williams <kb4oer at gmail.com>
>>> wrote:
>>>
>>>   Tom, a cheap VLF receiver can be your computer's sound card. If you have
>>>> an e-probe that is sensitive at VLF, you can often connect the receiver
>>>> output of your DC power coupler directly to the mic or line in on your PC
>>>> and view the output using Spectrum Lab software (free). Spectrum Lab has
>>>> some included settings what have common VLF stations already marked on
>>>> the
>>>> spectrum display.
>>>>
>>>> -Doug
>>>>
>>>> On Wed, Nov 19, 2014 at 9:32 AM, Garry Hess <k3siw at sbcglobal.net> wrote:
>>>>
>>>>   Tom, the VLF captures were made with a rooftop eprobe and sdr-iq
>>>>> receiver.
>>>>>
>>>>> Re: lowfer EAR: J.B., it's coming in well here too but MLS isn't even
>>>>> detectable despite being a bit closer.
>>>>> --
>>>>> 73, Garry, K3SIW, EN52ta, Elgin, IL
>>>>>
>>>>> ______________________________________________________________
>>>>> Lowfer mailing list
>>>>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>>> Post: mailto:Lowfer at mailman.qth.net
>>>>> Post must be less than 50KB total for message plus attachment!
>>>>>
>>>>> This list hosted by: http://www.qsl.net
>>>>> Please help support this email list: http://www.qsl.net/donate.html
>>>>>
>>>>>
>>>>   ______________________________________________________________
>>> Lowfer mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Lowfer at mailman.qth.net
>>> Post must be less than 50KB total for message plus attachment!
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>>
>>>
>> ______________________________________________________________
>> Lowfer mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Lowfer at mailman.qth.net
>> Post must be less than 50KB total for message plus attachment!
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>



More information about the Lowfer mailing list