[Lowfer] wm

[Mitch Powell]

Mike:
Nice to hear that you are activating WM. For your information, the 50 foot
loop was the one Bill used for his transmissions over many years. During
the first few years I was able to copy his transmissions every month of the
year - with ARGO captures in each month, so the 50 foot loop and his tiny
amplifier certainly were able to propagate the signal over this path to
South-Western Ontario. The path was over 500miles - so not bad for Spring,
Summer and Fall periods. Winter was no problem.
Good luck - and I will be listening for you with others.
73
Mitch " M P " EN92ix

On Sun, Nov 16, 2014 at 2:24 PM, Michael Sapp <wa3tts at verizon.net> wrote:

> Mike: Likewise, I will leave my rx on 185.300 listening on my SW EWWE
> antenna transformer.....73, Mike wa3tts
>
>
> ----- Original Message ----- From: "Douglas D. Williams" <kb4oer at gmail.com
> >
> To: "Discussion of the Lowfer (US, European, &amp, UK) and MedFer bands" <
> lowfer at mailman.qth.net>
> Sent: Sunday, November 16, 2014 1:39 PM
> Subject: Re: [Lowfer] Lowfer capture
>
>
>  Hi Mike. I'll be happy to give a listen any evening that you want to
>> conduct transmitting experiments. We are only about 340 miles apart.
>>
>> -Doug KB4OER
>>
>> On Sun, Nov 16, 2014 at 1:28 PM, N8OOU <n8oou at meekfarm.us> wrote:
>>
>>  Andy,  Mike Meek here, N8OOU. I looked at the capture you just posted an
>>> am not sure I understand the time stamps.
>>>
>>> I have been conducting on air tests of the Wm beacon on 185.300x. That is
>>> the Bill Ashlock machine. I am currently using a 50 Ft diameter loop and
>>> trying to get it resonant at that freq. At about 7pm cst last night I
>>> finally got some current flowing in the loop, and I let it run over night
>>> until about 9am CST this morning.
>>>
>>> In the capture you posted I don't see my signal, but I'm not sure if it
>>> covered my up-time. Could you confirm that for me?
>>>
>>> I also don't know if a 50 Ft loop is enough wire in the sky, of if I even
>>> have enough "fire in the wire" to reach you.  I'm at the beginning in the
>>> lowfer transmitting curve.
>>>
>>> Do you have captures in that timeframe and if so could you take a look
>>> for
>>> my signal?
>>>
>>> Thanks
>>> --
>>> 73   de   N8OOU - Mike Meek
>>> ______________________________________________________________
>>> Lowfer mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Lowfer at mailman.qth.net
>>> Post must be less than 50KB total for message plus attachment!
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>>
>>>  ______________________________________________________________
>> Lowfer mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Lowfer at mailman.qth.net
>> Post must be less than 50KB total for message plus attachment!
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>