[Lowfer] Sampling Rate and Frequency Calibration

[John Andrews]

Garry,

You bring up a point that has been troubling me. The original version of 
Argo brought any offset into the calculation of the calibration marks at 
the right of the screen. The current version leaves some very hard to 
quickly interpret results - the tick marks are oddball frequencies.

Does this bother anyone else, or am I alone in my discontent?

John A.

On 1/21/2014 5:05 PM, Garry Hess wrote:
> John,
>
> Very nice writeup! One addition I like is that, along with the receiver
> offset, you add the dial frequency too so captures show the actual
> frequency directly on the frequency scale. That way there's no need for
> viewers to know/guess the expected pitch frequency (I prefer 400 Hz
> myself but on some modes use 800 or 1000 Hz) and dial frequency (I
> nearly always use USB, but others might prefer LSB or CW) to get the
> actual frequency. That also eliminates uncertainty on archived captures
> as to what the actual frequency is.
>
>
>
> Internal Virus Database is out of date.
> Checked by AVG - www.avg.com
> Version: 8.5.455 / Virus Database: 271.1.1/5970 - Release Date: 07/06/13 16:46:00
>