[Lowfer] ] WG2XLP 74.324 KHz. QRSS60

[Pat Bunn]

John

I'll leave it running all night but I don't expect much  Just put a scope on the output and I have about 16 watts out of the filter. The cores overheat with anymore power. That isn't likely going to do much although Dex got a decent signal this afternoon at a distance of 100 miles.

Pat
WG2XCT
WG2XLP

Sent from my iPhone

On Jan 14, 2014, at 8:05 PM, Pat Bunn <pbunn at matrixei.com> wrote:

> John
> 
> Hopefully I can get the power up in the next few days. I can move if there is a problem with .324
> 
> Thanks for looking
> 
> Pat
> 
> Sent from my iPhone
> 
> On Jan 14, 2014, at 7:59 PM, JD <listread at lwca.org> wrote:
> 
>> Hi Pat.  Will return to the field and look for you again.  I was going to 
>> ask if you would be able to move, as I saw right away there was no chance of 
>> seeing you anywhere near Bob.  Then XKO came on too, right where I was first 
>> going to suggest, so I figured I'd better come home and check e-mail really 
>> quick,  You'll be well away from the two powerhouses at 74.324, but I hope 
>> there won't be any PLCs there either (I hadn't looked that far up the dial 
>> yet).
>> 
>> John 
>> ______________________________________________________________
>> Lowfer mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Lowfer at mailman.qth.net
>> Post must be less than 50KB total for message plus attachment!
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html