[Lowfer] 10 MHz OCXO for W1TAG sound card calibrator

[John Andrews]

Charlie,

Oooooppps. I got two requests last weekend, printed them out, and they 
wound up in a pile of papers. Will get in touch!

John, W1TAG

On 2/15/2014 7:14 PM, Charlie , W5COV wrote:
> I want to order the PIC from John , to use with one of my Wenzel OCXO's
> , but haven't been able to get in touch with John and order one.
>
> Charlie, W5COV
>
>
> On 2/15/2014 6:03 PM, Dexter McIntyre W4DEX wrote:
>> I received the 10 MHz OCXO from Paul today.  From a cold start,
>> approximately 65F, it took only 3 minutes for the oven to warm up and
>> start regulating.   The initial 12 volt current was only 500 ma and
>> went down to about 150 ma after warm up.  With one channel of a dual
>> trace scope triggered by 10 MHz from the GPS locked output of a HP
>> Z3801 the OCXO trace on a second channel was barely creeping after the
>> 3 minute warm up.  I tweaked the OCXO trace dead on with the Z3801 and
>> after several hours it has not moved.
>>
>> Dex ______________________________________________________________
>> Lowfer mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/lowfer
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Lowfer at mailman.qth.net
>> Post must be less than 50KB total for message plus attachment!
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
>
> Internal Virus Database is out of date.
> Checked by AVG - www.avg.com
> Version: 8.5.455 / Virus Database: 271.1.1/5970 - Release Date: 07/06/13 16:46:00
>