[Lowfer] 10 MHz OCXO for W1TAG sound card calibrator

[Charlie , W5COV]

I want to order the PIC from John , to use with one of my Wenzel OCXO's 
, but haven't been able to get in touch with John and order one.

Charlie, W5COV


On 2/15/2014 6:03 PM, Dexter McIntyre W4DEX wrote:
> I received the 10 MHz OCXO from Paul today.  From a cold start, 
> approximately 65F, it took only 3 minutes for the oven to warm up and 
> start regulating.   The initial 12 volt current was only 500 ma and 
> went down to about 150 ma after warm up.  With one channel of a dual 
> trace scope triggered by 10 MHz from the GPS locked output of a HP 
> Z3801 the OCXO trace on a second channel was barely creeping after the 
> 3 minute warm up.  I tweaked the OCXO trace dead on with the Z3801 and 
> after several hours it has not moved.
>
> Dex ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>