[Lowfer] WE2XGR/2 /3 WSQ2 mode

[lloyd chastant]

Copy seems ok on the signal between the red lines but who is that much
stronger sig that came on??
lloyd W3NF


On Tue, Feb 11, 2014 at 11:13 PM, <jrusgrove at comcast.net> wrote:

> WE2XGR/2 and WE2XGR/3 will be running tests in WSQ2 mode tonight. WE2XGR/2
> is currently transmitting WSQ2 at reduced power on 474.2 kHz (dial) +1000
> Hz. Reports are appreciated. Please advise if the frequency choice causes
> problems.
>
> This new mode is similar to Jason but is faster (than Jason 'normal'
> speed) and is designed for two way communications as opposed to a beacon
> only mode. Sensitivity is reported to be about -25 dB referenced to an SSB
> bandwidth.
>
> Details and program download available at http://www.qsl.net/zl1bpu/
> SOFT/WSQ.htm .
>
> Jay W1VD  WD2XNS  WE2XGR/2  WG2XRS/2
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: wsq1.jpg
Type: image/jpeg
Size: 33474 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/lowfer/attachments/20140212/10dc2a75/attachment.jpg>