[Lowfer] WE2XGR/2 /3 WSQ2 mode
John Andrews
w1tag at charter.net
Tue Feb 11 18:56:42 EST 2014
Due to a computer issue with the program, I won't be running until
later. So just look for Jay!
John, W1TAG / WE2XGR/3
On 2/11/2014 6:13 PM, jrusgrove at comcast.net wrote:
> WE2XGR/2 and WE2XGR/3 will be running tests in WSQ2 mode tonight.
> WE2XGR/2 is currently transmitting WSQ2 at reduced power on 474.2 kHz
> (dial) +1000 Hz. Reports are appreciated. Please advise if the frequency
> choice causes problems.
>
> This new mode is similar to Jason but is faster (than Jason 'normal'
> speed) and is designed for two way communications as opposed to a beacon
> only mode. Sensitivity is reported to be about -25 dB referenced to an
> SSB bandwidth.
>
> Details and program download available at
> http://www.qsl.net/zl1bpu/SOFT/WSQ.htm .
>
> Jay W1VD WD2XNS WE2XGR/2 WG2XRS/2
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
>
> Internal Virus Database is out of date.
> Checked by AVG - www.avg.com
> Version: 8.5.455 / Virus Database: 271.1.1/5970 - Release Date: 07/06/13 16:46:00
>
More information about the Lowfer
mailing list