[Lowfer] Running WG2XCT CW beacon on 471.80 KHz all weekend

Pat Bunn pbunn at matrixei.com
Sun Apr 27 08:42:56 EDT 2014


Michael

Thanks for the capture and report. 

Pat
WG2XCT

Sent from my iPhone

On Apr 26, 2014, at 11:01 PM, N8OOU <n8oou at meekfarm.us> wrote:

> Argo captures of 471.8 received by my kenwood ts-480 and 5 band trap vertical. Early evening nothing was audible or visible in argo at qrss3
> After local sunset argo started showing a line but again nothing audible. At 02:24 utc the signal strength improved as shown in the capture. Was able to decode the cw id by ear, and a switch to cw/ndb mode in argo.
> 
> Good Luck N8OOU M.Meek
> On 04/26/2014 09:58 AM, Pat Bunn wrote:
>> Running CW beacon at about 400 watts all weekend letting transmitter burn in. 471.8 KHz CW. All reports appreciated especially ground wave.
>> 
>> Pat
>> WG2XCTo
>> 
>> Sent from my iPhone
>> 
>> --
> 73   de   N8OOU - Mike Meek
> 
> <argo47180006.jpg>
> <argo47180009.jpg>
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html


More information about the Lowfer mailing list