[Lowfer] WSPR 15 tonite on 73.0 Dial Freq 74.550 Tx Freq.

[mitch.powell at sympatico.ca]

Jd - off the air due to DDS problems. Will tackle the problem tomorrow. Tnx for reports earlier.
73
Mitch

Sent from my BlackBerry 10 smartphone.
From: JD
Sent: Friday, September 27, 2013 10:14 PM
To: Discussion of the Lowfer (US, European, & UK) and MedFer bands
Reply To: Discussion of the Lowfer (US, European, & UK) and MedFer bands
Subject: Re: [Lowfer] WSPR 15 tonite on 73.0 Dial Freq 74.550 Tx Freq.


>>> have the radio tuned to 72.930 and listening at 1620 hz audio.

Not familiar with WSPR-X yet, but I concluded that's what I needed to do as
well if the transmit audio was set for 1550, outside the WSPR-15 spec.  Or
else, lie to it about my BFO frequency, but that gets even more confusing,
as I found out playing with WSPR-2 recently.

Unfortunately, it's a moot point here tonight.  Two BIG lines of storms in
the western part of the state already had it awfully noisy here before
sunset.  Couldn't even see MP, which is pretty drastic.  Hope for a chance
to try again in a couple of days when this moves past.  A good loop antenna,
probably with a sense antenna and a phaser for a bit of pattern flexibility,
is high on my list of priorities.

John D

______________________________________________________________
Lowfer mailing list
Home: http://mailman.qth.net/mailman/listinfo/lowfer
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Lowfer at mailman.qth.net
Post must be less than 50KB total for message plus attachment!

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html