[Lowfer] WG2XNI 186.008 Khz QRS3 Now

[John Andrews]

Mark,

Not a hint here.

John, W1TAG
FN42ch

On 11/9/2013 7:58 AM, Garry Hess wrote:
> Mark,
>
> QRSS3 definitely helped as I did find your signal last night. Not strong
> enough to determine individual characters though so used ARGO at QRSS10.
> Wonder what your setup is - transmit power and antenna? Last winter
> copied your lowfer fine, but that was at QRSS30 bandwidth. Signals
> overnight from the west were pretty good (check out the 474.2 kHz WSPR
> excitement!). Decoded some text on 518 kHz Navtex from Tofino, BC, area
> 12, station H as early as 0110Z. Also heard the DGPS on 315 kHz in
> Amphitrite Pt, BC and on 302 kHz decoded both Point Loma, CA and Whidbey
> Island, WA. However, conditions deteriorated quickly after midnight.
>
>
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> Post must be less than 50KB total for message plus attachment!
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
>
>
> Internal Virus Database is out of date.
> Checked by AVG - www.avg.com
> Version: 8.5.455 / Virus Database: 271.1.1/5970 - Release Date: 07/06/13 16:46:00
>